• <div id="vphsy"><strike id="vphsy"><kbd id="vphsy"></kbd></strike></div>
    <th id="vphsy"><legend id="vphsy"></legend></th>
    <li id="vphsy"></li>

    <progress id="vphsy"><tbody id="vphsy"></tbody></progress>
      banner
      Guangzhou LEDO Electronic Co.,Ltd > News > Tech Knowledge > Blade Led Headlight Test Report

      Blade Led Headlight Test Report

      1,939 Published by Ava 10 18,2018

      This is Blade led headlight which was launched on May 2018. Its double beam led bulb was designed with 24 pcs of SEOUL CSP-Y19?LED CHIPS, while?the single beam led bulb was designed with 12 pcs of SEOUL CSP-Y19?LED CHIPS. Take the H11 led bulb single beam as?an example, its length is 87.3mm, the width of its heat sink is 32mm. For the bulb body part, the length is 41.9mm and the width is 12.mm.

       

       

      Besides, the distance between opposing LEDs?is 2.54mm, almost equivalent to the filament width of factory halogen bulb, which is 2mm.?Generally, its?volume is relatively compact?compared to others fanless led headlights.

       

       

      The heat sink of Blade led headlight using 6003 Aluminum alloy, heat sink and bulb body are integrated by the hot pressing?process for better heat dissipation, which?can’t be disassembled.

       

      LED Bulb Operating Temperature Testing :

       

      Testing the led bulb with 13.5-volt power supplied for 30 minutes and the room temperature is?about 25 degrees, the led bulb surface temperature is as below:

       

       

      The temperature of the led bulb at the beginning | The temperature of led bulb after 30minutes

       

      The temperature of the driver at the beginning | The temperature of the driver after 30minutes

       

      The operating temperature of led chips keep at about 110 degrees, the junction temperature of SEOUL CSP-Y19 LED is 145 degrees, which isn’t?higher than the led bulb junction temperature.

      SEOUL CSP-Y19?LED official specification PDF:

      http://www.seoulsemicon.com/upload2/Specification_Z8Y19_Rev5.2.pdf/

       

      Flux (Lumen) Output Testing:

       

      The raw lumen data is 4000 lumen. We have tested a led bulb in integrating sphere for 30 minutes, The statistical lumen data are as follows:

       

       

      A LED BULB emits 1778 flux (lumen) at the beginning ( around 3556 flux for a kit); and emits around 1250 flux (lumen) in 30 minutes ( around 2500 flux for a kit).

       

      Light Beam pattern testing:

       

      We test in 4 meters from the wall. And take the photo by SLR camera in setting ISO: 100, Shutter Speed: 10, Exposure: 10. Get the beam pattern?distribution?graphic?as below:

       

      A single Blade led headlight bulb is measured at 1485 lux inside the headlight housing. B50L is measured at 151 lux.

      For any query of these data, please check our another article: 4 Simple Methods to Select the Best LED Headlight Bulbs.

      Product





      大香蕉视频在线播放2019